PriceList for 6 Colour Ci Flexo Printing Machine For Pp Woven - 8 color CI printing machine for woven bag – Changhong

Characteristic

• The machine introduction & absorption of European technology / process manufacturing, supporting / full functional.
• After mounting the plate and registration, no longer need registration, improve yield.
• The machine first mount plate, pre-trapping function, to be completed in advance prepress trapping in the shortest possible time.
• The machine is equipped with blower and heater, and the heater employed central temperature control system.
• When machine stop, Tension can be maintained, the substrate is not deviation shift.
• The individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
• With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one person can operate.

technical specifications

Double station unwinding:

• Center-driven unwinding, equipped with magnetic powder brake, equipped with automatic tension control；
• Tension control: Ultra-light floating roller control, automatic tension compensation, closed loop control;(Low-friction cylinder position detection, precision pressure regulating valve control, automatic alarm or shutdown when the coil diameter reaches the set value)
• It has the function of automatic shutdown when the material is interrupted, and the tension maintains the function to avoid the substrate slack and deviation during the shutdown
• The outer diameter of the air expansion shaft is 3 inches, and the clamping method of the air expansion shaft is a 2-head cylinder release type.
• Configure automatic EPC system before printing
• EPC: Before printing, a four-roller automatic EPC ultrasonic probe correction system has manual/automatic/center return functions, and the left and right translation can be adjusted by ±65mm.

Printing Unit

• Type : CI Flex Printing Machine
• Color: 4 colors on the front + 4 colors on the back
• Drive mode: Servo gear drive
• Motor: Servo motor drive, inverter control closed loop control
• Printing method hotosensitive resin plate, suitable for both water-based and alcohol-soluble inks
• Printing Repeat: 400-1200mm

Double station Rewinding

• Double-station Surface friction winding, Equipped with servo cutter, stable segment length
• The tension control adopts ultra-light floating roller control, automatic tension compensation, closed-loop control, and arbitrary setting of taper tension (low-friction cylinder position detection, precision pressure regulator control, automatic alarm or shutdown when the roll diameter reaches the set value)
• It has the function of automatic shutdown when the material is interrupted, and the tension maintains the function to avoid the substrate slack and deviation during the shutdown