4 Colour CI Flexo Printing Machine
Technical Specifications
| Model | CHCI4-600E | CHCI4-800E | CHCI4-1000E | CHCI4-1200E |
| Max. Web value | 650mm | 850mm | 1050mm | 1250mm |
| Max. Printing value | 600mm | 800mm | 1000mm | 1200mm |
| Max. Machine Speed | 300m/min | |||
| Printing Speed | 250m/min | |||
| Max. Unwind/Rewind Dia. | φ800mm | |||
| Drive Type | Gear drive | |||
| Plate thickness | Photopolymer plate 1.7mm or 1.14mm (or to be specified） | |||
| Ink | Water base ink or solvent ink | |||
| Printing length (repeat) | 350mm-900mm | |||
| Range Of Substrates | LDPE; LLDPE; HDPE; BOPP, CPP, PET; Nylon，PAPER，NONWOVEN | |||
| Electrical supply | Voltage 380V. 50 HZ.3PH or to be specified | |||
Video introduction
Machine Features
● The machine introduction & absorption of European technology / process manufacturing, supporting / full functional.
● After mounting the plate and registration, no longer need registration, improve yield.
● Replacing 1 set of Plate Roller (unloaded old roller, installed six new roller after tightening), only 20 Minute registration can be done by printing.
● The machine first mount plate, pre-trapping function, to be completed in advance prepress trapping in the shortest possible time.
● Maximum production machine speed up 300m/min, registration accuracy ±0.10mm.
● The overlay accuracy does not change during lifting running speed up or down.
● When machine stop, Tension can be maintained, the substrate is not deviation shift.
● The whole production line from the reel to put the finished product to achieve non-stop continuous production, maximize product yield.
● With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one person can operate.
Details Display
1,One unit use center drive rewind,servo motor ,Inverter closed-loop control.
2,Tension control: adopt super light float roller, and tension automatic compensation,closed-loop control.
3,Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.
4,Air shaft loading
5,Inspection light
1,Number of printing decks: 4/6/8
2,Drive mode: Gear Drive
3,Drive motor : Servo Motor drive ; Inverter control close loop control
4,Printing way : 1)Plate -Photopolymer plate ; 2)Ink--water base or solvent ink
5,Printing Repeat: 400-900mm
6,Gearing of printing cylinder: 5mm
1,Display resolution: 1280*1024
2,Enlargement factor: 3-30（Enlargement factor of area）
3,Display mode: Full screen
4,Image capture interval: decided by PG encoder/ gear sensor position signal.
5,Camera check speed: 1.0m/min
6,Check range: depends on the material width, arbitrarily setting. It is ok for adjustable point monitor or automatic back and forth.
1,Drying oven inner container.
2,Heat exchanger.
3,Muzzle are all made of stainless steel plate.
4,Dry oven has independent fan for intake air and independent fan for air exhaust. By control the supply air rate and adjust air damper, the machine printing process will get the best wind speed、wind pressure, higher drying oven heat efficiency, and save energyconsumption; Cylinder control the drying oven opening and closing, with guard bar and walkway floor.
1,Surface of central press roller with constant temperature.±0.008mm
2,Accuracy control: within ±1℃
3,Diameter: Ф 1200mm/1600mm
4,Made in China
5,The central drum adopt hollow with two layers structure, made from superior alloy steel and precise dynamic balance treatment and surface electroplated treatment to make the frame surface without etching.
1,Single unwind central drive , with servo motor ,Inverter control Closed-loop.
2,Tension control : Adopt Light float roller . tension auto compensation ,close-loop control.Air shaft loading material.
3,EPC (edge position control): Set and run four roll type automatically EPC ultrasonic detector system; With manually/automatically/ central return function, can adjust left and right around ±65mm width.
Options
Video Inspection
Check the printing quality on the video screen.
Corona
Prevent fading after printing.
Chamber Doctor Blade
With two way cycle ink pump, no spill the ink, even the ink, sa
Printing Samples
FAQ
Q: Are you a factory or trading company?
A: We are a factory, the real manufacturer not trader.
Q: Where is your factory and how can I visit it?
A: Our factory is located in fuding City, FuJian Province, China about 40 minutes by plane from Shanghai ( 5 hours by train)
Q: What is your after-sale service?
A: We have been in flexo printing machine business for many years, we will send our professional engineer to install and test machine.
Beside, we can also provide online support, video technical support, matching parts delivery, etc. So our after-sales services is always reliable.
Q: How to get machines price?
A: Pls provide following information:
1）The color number of printing machine;
2）Material width and effective print width;
3）What material to print;
4）The photo of printing sample.
Q: What services do you have?
A: 1 Year Guarantee !
100% Good Quality !
24 Hours online Service!
The buyer paid tickets ( go and back to FuJian), and pay 100usd/day during the install and testing period!
